Teac DR-2D - Manual (Page 33)

TASCAM DR-2d
33
In addition to using the built-in microphone, you can record
using an external microphone or record the output signal
from a mixer or other audio source. You can select among
MP3 (44.1/48 kHz, 32–320 kbps) and WAV (44.1/48/96 kHz,
16/24-bit) audio recording formats. With this unit, you can mix
and record a sound input through the built-in mic or one of
the input jacks with an audio file that is played back using the
overdubbing function.
You can also record two files with different recording levels at
the same time (dual recording).
Selecting file format/sampling frequency,
and maximum file size
Select the audio file type that you want to record before you
start recording.
1 Press the MENU key to open the Menu Screen.
2 Use the wheel to select REC SETTING , and press the
ENTER/MARK key.
REC SETTING screen appears.
3 Use the wheel to select FORMAT , and press the ¯ key or
ENTER/MARK key.
Set the file format from one of the following choices.
WAV: 16bit (default), WAV 24bit
MP3: 32kbps, 64kbps, 96kbps, 128kbps, 192kbps,
256kbps, 320kbps
NOTE
Higher values provide better recording quality. •
WAV files are higher quality than MP3 files, but they take •
up more space, so MP3 formats allow for longer recordings.
4 Press the  key to select the other item.
4–Recording