Teac CD-BT2 - Manual (Page 39)

IMPORTANT SAFETY INSTRUCTIONS
TASCAM CD-BT2
Making various settings
Setting the time display
You can set how the CD time is displayed.
Select one of the following
TIME INFO
settings.
ELAPSED
elapsed time of current track
REMAIN
remaining time of current track
TOTAL REMAIN
remaining time of entire disc
NOTE
The selected time display mode is shown on the
TIME
DISPLAY
screen.
Changing the display contrast
You can change the display contrast as needed to suit the
surrounding lighting and other conditions.
Set the
CONTRAST
between 1 and 10 with higher numbers
providing greater contrast.
Restoring all settings to their default
values
Press and hold the µ and ≤ keys simultaneously as you
turn the power ON to open the
INITIALIZE
screen at
startup.
Follow the instruction on screen after startup, and press the
¥/π
key to restore every effect parameter, playback setting
and other function to the default values set when the unit was
shipped from the factory.