Teac CD-BT2 - Manual (Page 10)

10 TASCAM CD-BT2
Batteries
If batteries are used improperly, or if leakage or breakage
occurs, the unit will not function.
Please observe the cautions indicated on the batteries and their
packaging to ensure proper usage.
Confirm + and – polarity and follow the indications when
inserting new batteries into the unit.
Do not use old and new batteries together.
Even if batteries are the same size, their voltage may differ.
Do not use batteries of different specifications together.
Do not attempt to recharge batteries that are
non-rechargeable.
Do not open or disassemble batteries, throw them into a
fire or put them in water. •
•
•
•
•
Inserting batteries
1 Open the lid.
2 Confirm +/- polarity, and insert four AA batteries.
3 Close the lid.
NOTE
This device does not include batteries when purchased.
We recommend nickel hydride or alkaline batteries.
Introduction