Teac CD-BT2 User Manual

Page 32

TASCAM CD-BT2

IMPORTANT SAFETY PRECAUTIONS

Using a bass with the trainer

PRESET
Choose the effect preset that you want. Each preset has a
different combination of up to four effect modules.
See the “Effect presets list” on page 41 for details about the
effect modules in each preset.

LVL knob
Adjusts the output level of the effect. Use the

CURSOR

(

) keys to select the

LVL

knob and open the pop-up with the

level value highlighted. Use the

VALUE

(+, –)

keys to adjust the

level setting between 0–100.

Effect modules
Use the

CURSOR

(

) keys to select the module icons and

open a pop-up with parameter settings as shown in the figure
below. The parameters depend on the type of module. For
details about the parameters for each module type, see the
“Effect module parameter list” on page 42.

The EQ module has different features and setting from other
effects as explained below.

EQ module
If you select the

module icon, the current EQ setting

(

BYPASS

) appears. Use the

VALUE

(+, –)

keys to change

this setting.

Use the

CURSOR

(

) key to open the EQ screen where you

can check and adjust the seven-band equalizer.

Use the

CURSOR

(

) keys to select the frequency

band (50Hz, 120Hz, 400Hz, 800Hz, 2kHz, 4.5kHz or
8kHz) that you want to adjust.

Use the

VALUE

(+, –)

keys to boost or cut each band up

to 18 dB.