Making various settings, Mono monitoring, Splitting the cd and bass output – Teac CD-BT2 User Manual

Page 38

TASCAM CD-BT2

IMPORTANT SAFETY PRECAUTIONS

Making various settings

You can change various settings to optimize the device for
your use environment and other requirements. All of the
following items are on the

SETUP & MISC.

screen.

Press the

MISC.

key to open the

SETUP & MISC.

screen.

Use the

CURSOR

(

) keys to select the desired item and

the

VALUE

(+, –)

keys to set the value.

Mono monitoring

You can output a mono signal from the

PHONES

and

LINE

OUT

jacks.

Select one of the following

MONO MONITOR

settings.

OFF

ordinary stereo monitoring (default setting)

L+R

both channel signals are mixed and output in mono

left channel signal is output on both channels

right channel signal is output on both channels

Splitting the CD and bass output

You can split the CD playback signal and bass signal output
through the

PHONES

and

LINE OUT

jacks so that only the CD

is on the left and only the bass is on the right.

Turn the

SPLIT CD/BASS

setting ON to output the CD

playback signal to the L channel in mono and the

BASS IN

signal to the R channel.