Super Systems 9120 with TS - Manual (Page 18)

SSi 9120 Touchscreen Interface
4586 – 9120 With Touch Screen Interface Page 18 of 80
Probe select mode
This determines how the specified probe is selected. The options are: highest mV, lowest mV,
or no auto switch (manual mode).
Communications Setup
This menu option will allow the user to
configure the communications settings
for the 9120 unit.
It is strongly
recommended that none of these
settings be modified without
assistance from Super Systems at
800-666-4330
.
RS-232B Baud
This will allow the user to set the RS-
232B baud rate.
This must be set to
19200 for the Touchscreen .
The options are:
1200
14400 57600
2400 19200 76800
4800 28800 115200
9600 38400
RS232B Mode
This will allow the user to set the RS232B mode.
Note – This must be set to Modbus for the
Touchscreen . The options are: Modbus master or Modbus.
RS-232A Baud
This will allow the user to set the RS-232A baud rate.
This must be set to 19200 for the
Touchscreen . Note – This option is fixed at 19200 and is not currently used in the 9120
Touchscreen .
The options are:
1200
14400 57600
2400 19200 76800
4800 28800 115200
9600 38400
RS232A Mode
This will allow the user to set the RS232A mode.
This must be set to Modbus for the
Touchscreen . The options are: Modbus, Cal Term, and Televac. Note – This option is fixed
at 19200 and is not currently used in the 9120 Touchscreen .
Host 485 Baud
This will allow the user to set the Host 485 baud rate.
This must be set to 19200 for the
Touchscreen .
The options are:
1200
14400 57600
2400 19200 76800