Super Systems MGA6010 - Manual (Page 32)

MGA 6010 Operations Manual
Super Systems Inc. Page 32 of 54
2. Open the Instrument Setup → Calculation
Factors menu.
3. Open the Equipment Specific IRF Matrices
menu option. Select the equipment for which
you want to set up an IRF Matrix. Then click
Edit.
4. IRF Matrix parameters for the selected
equipment will be displayed. Edit the
parameters for the equipment. Parameters are
described in the IRF Adjustment Matrix section
above.
5. Click Save when finished editing parameters.
The IRF Matrix for this particular equipment is
now set up.
When ready to start a Session for this piece of
equipment:
6. Open the Sessions menu from the main MGA
6010 menu.
7. Using the Equipment Name drop-down box,
select the piece of equipment for which you
want to want to apply an Equipment Specific
IRF Matrix.
8. Make sure that the Use Equipment Specific IRF
Matrix box is checked.
9. Press Start to begin the Session.