Super Systems MGA6010 - Manual (Page 20)

MGA 6010 Operations Manual
Super Systems Inc. Page 20 of 54
Gas Inlet Ports for Automatic Calibration
The Auxiliary Calibration Port makes use of the Auxiliary Calibration Gas Inlet, located on the side of the
unit and in the middle of the gas inlets for Zero Calibration and Span Calibration. A single gas line is run
to the Auxiliary Calibration Gas Inlet port for zero and span calibration.
Gas Inlet Port for Auxiliary Calibration
Calibration with a Sample Line makes use of the Sample Inlet Port located on the side of the unit opposite
the ports used for Automatic Calibration and Auxiliary Calibration. The option selected will depend on
whether the pump is running [Sample Line (with pump on)] or not running [Sample Line (with pump off)].