Super Systems MGA6010 - Manual (Page 27)

MGA 6010 Operations Manual
Super Systems Inc. Page 27 of 54
• SSi AC20
• SSI 9200/9205 Loop 1
• SSI 9200/9205 Loop 2
• SSI 9200/9205 Loop 3
• SSI 9100 Loop 1
• Yokogawa UDP750
• Honeywell UDC3300
• Dualpro Loop 1 Modbus
• Dualpro Loop 2 Modbus
Furnace Temp Instrument Address
This is the address of the furnace temperature instrument. It can be directly entered using the numeric
keypad on the touch screen.
Port Setup
This page is used to set the parameters for the communications ports. The factory default settings are
shown below, and they should not need to be changed by the operator.