SP Controls PixiePro - Manual (Page 9)

3. Wall Flush Mounting
The PixiePro may be flush mounted into a wall using either a standard four-gang back box and con-
duit, or using a four-gang mud ring.
Back Box: Cut a four-gang hole in the wall and install a standard four-gang wall box. Secure the
PixiePro into the wall box using the included mounting screws. Cover the PixiePro face with the
included faceplate and secure with the included screws.
Mud Ring: Cut a four-gang hole in the wall and install a standard four-gang mud ring. Secure the
PixiePro into the mud ring (not included) using the included screws. Cover the PixiePro face with the
included faceplate and secure with the included screws.
Note: SP Controls strongly recommends use of a mud ring for mounting the PixiePro in sheet rock
to ensure a secure fit.
4-Gang
Back Box
(not included)
6
Figure 5: Mounting the PixiePro in a back box (not included)