SP Controls PixiePro - Manual (Page 5)

The flexible interface may be customized to your requirements. Most buttons may be replaced by
blank button modules if unneeded. PixiePro can control almost any IR-controllable device. The
PixiePro may be field-programmed in minutes using IR-learning technology. Configuration and pro-
gramming may be quickly and easily copied to multiple units with CAT5 cable, or using wireless
cloning technology. For instructions on assembling PixiePro button modules, see the Assembly sec-
tion on page 4.
PixiePro has configurable features including automatic brightness adjustment, security code lockout,
automatic inactivity shutdown timer, multiple-device transport control, and many others that will be
described later in this manual. The default configuration settings on the PixiePro will be suitable for
the majority of users. If you want to learn about the configuration options, or change any of those,
go to the Configuration section on page 19.
For multi-room installations, in which each room has an identical projector, learned codes and con-
figuration settings can easily be copied or “cloned” from one PixiePro to another. This can be done
either wirelessly or through CAT5 cable. For instructions on copying settings and codes from one
PixiePro to another, see the Cloning section on page 17.
Unneeded
buttons may be
replaced with
blank plastic.
2
Two aux buttons with two blanks
Figure 2: PixiePro with blank button modules inserted in some areas