SP Controls PixiePro - Manual (Page 23)

Configuration Settings
Group 1 - Core Functions
- Setting 1 - Multiple-Device TCM Mode
- Setting 2 - “Device 0” on TCM in Multiple-Device Mode
- Setting 3 - Input Selection Lights on TCM Persist in Single-Device Mode
- Setting 4 - Defeat In-Progress Macro on Button Press
- Setting 5 - Fixed-Length Code Learning
- Setting 6 - Fixed-Length Code Learning Applies to Single-Code Learning
- Setting 7 - High-Frequency Carrier Default
Group 2 - Timers
- Setting 1 - Automatic Shutdown Timer
- Setting 2 - Warm Up Display Timer
- Setting 3 - Cool Down Display Timer
- Setting 4 - Security Retry Lockout Timer
Group 3 - Security
- Setting 1 - Enable/Disable Security Lock
- Setting 2 - Lock on Inactivity Shutdown
- Setting 3 - Enter or Retrieve Security Code
Group 4 - Interface Settings
- Setting 1 - Button Click On/Off
- Setting 2 - Click on Every Macro Send
- Setting 3 - LED Brightness Level
- Setting 4 - Enable Ambient Light Adjust
- Setting 5 - Volume Animation On/Off
- Setting 6 - Press-and-hold Off
Setting Configuration Values
Settings are of two types: toggling and scalar. Toggling settings are either on or off. Scalar settings
have values within a range, the lowest setting being 0-0, the highest being 3-7.
Use the Volume Up and Volume Down buttons and display to adjust each setting. Toggling settings
toggle between on (indicated by “splayed” or alternating Volume Display lights illuminated) and off
(indicated by one LED in the center of the Volume Display illuminated). Scalar settings may be set
to 32 different values, ranging from 0-0 through 3-7. See the figure below for examples.
20
Toggle - On Toggle - Off 0-0 0-1 0-7
1-7 2-7 3-7 3-1
Figure 17: Volume Display setting examples for toggling
and scalar values