SP Controls PixiePro - Manual (Page 6)

II. Parts List
Note: Keep all button inserts and included materials, even if some modules are not currently
used. They may be required in the future for changing the PixiePro configuration settings, repro-
gramming the PixiePro, or changing equipment in the room.
The PixiePro ships with:
PixiePro main board
1 four-gang plastic surface mount box
1 custom plastic wall plate
Rubberized button modules:
- 1 toggling power module
- 1 discrete power on/off module
- 1 status LED module - projector icon
- 1 status LED module - monitor icon
- 1 volume control/display button module
- 8 source selection button modules
- 4 aux control button modules
- 1 ambient light sensor dome
- 1 menu/security button module
- 1 transport control/menu button module
- 1 device up/down button module
Plastic blank button replacement inserts:
- 1 volume module blank
- 1 aux up/down blank
- 3 two-button source selection blanks
- 1 one-button source selection blank
- 4 aux button plastic negatives
- 1 menu control module blank
- 1 transport control/menu module blank
- 1 device up/down button module blank
Plastic button overlay anchors for all button module types
1 plastic bezel
1 IR emitter with fiber optic output assembly
Velcro™ tape
1 regulated power supply
1 sheet of non-adhesive, transparent button legends
4 screws/washers (for back box mounting)
2 wall anchors/screws
Optional Accessories and Parts:
PXE-EMIT - additional IR emitter with fiber optic output assembly (required for control of multiple
devices - one per device)
PXE-DCM-PS (additional power supplies required for installations with more than six IR emitters)
3