Sloan 601 Prison Flushometer - Manual (Page 8)

Item Part Description
No. No.
1 † Valve Body
2 H-730-A RB Wheel Handle Bak-Chek ® Control Stop
3 C-9-A Blind Nut Push Button Actuator Assembly
4 A-31 Gasket
5 K-46 Gasket
6 A-6 Coupling
7A HY-25 Valve Actuator Housing (only)
HY-30 1/4” x 48” Connecting Tubes (two required)
7B HY-83-A Actuator Cartridge Assembly
7C HY-100-A Hydraulic Flushometer Push Button Actuator (MBFW Variation)
7D HY-108-A Hydraulic Flushometer Push Button Actuator (MBPM Variation)
8A V-500-AA 3/4” (19 mm) x 10-1/2” (267 mm)
Vacuum Breaker Assembly RB (Models 613 and 9613)
8B V-500-AA 1-1/2” (38 mm) x 17-1/2” (445 mm)
Vacuum Breaker Assembly RB (Model 601)
V-500-AA 1-1/2” (38 mm) x 13” (330 mm)
Vacuum Breaker Assembly RB (Models 603 and 9603)
V-500-AA 1-1/2” (38 mm) x 11-1/2” (292 mm)
Vacuum Breaker Assembly RB (Models 609 and 9609)
V-500-AA 1-1/2” (38 mm) x 21” (533 mm)
Vacuum Breaker Assembly RB (Model 611)
V-500-AA 1-1/2” (38 mm) x 23” (584 mm)
Vacuum Breaker Assembly RB (Model 681)
9 F-2-AA 1-1/2” (38 mm) Slip Joint Couplings (two per package)
10 F-2-AW 3/4” (19 mm) Slip Joint Coupling RB
11 F-15-A ELL with 3/4” (19 mm) Tail RB
12 F-21 1-1/2” (38 mm) Double Slip Elbow
13 F-2-A 1-1/2” (38 mm) Coupling with S-21 Gasket
14 F-100 1-1/2” (38 mm) x 3-1/4” Flared End Flush Connection
Not Shown LocTite Thread Sealant
† Part number varies with valve model variation; consult factory.
MODELS 601, 603, 609, 611, 681,
9603 and 9609
MODELS 613 and 9613
Standard Push Button Flushometer
Hydraulic Push Button Flushometer
1
11 13 10
8A
14
10
12
9
9
8B
2
1
7D
7C
7B
7A
6 4
3
2
Manufactured in the U.S.A. by Sloan Valve Company under one or more of the
following patents: U.S. Pats. 5,295,655; 5,542,718; 5,558,120; 5,564,460;
5,865,420; 5,887,848; 5,967,182. Other Pats. Pending. BAK-CHEK, PARA-
FLO, PERMEX, TURBO-FLO.
NOTE: The information contained in this document is subject to change without notice.
When assistance is required, please contact your local
Sloan Representative or Sloan Technical Support at:
1-888-SLOAN-14 (1-888-756-2614)
5
DO NOT USE abrasive or chemical cleaners (including chlorine bleach) to clean flushometers that may dull the luster and attack the chrome or special
decorative finishes. Use ONLY mild soap and water, then wipe dry with clean cloth or towel.
While cleaning the bathroom tile, protect the flushometer from any splattering of cleaner. Acids and cleaning fluids will discolor or remove chrome plating.
SLOAN HEADQUARTERS • 10500 SEYMOUR AVENUE • FRANKLIN PARK, IL 60131
Ph: 1-800-9-VALVE-9 or 1-800-982-5839 • Fax: 1-800-447-8329 • www.sloanvalve.com
© 2013 SLOAN VALVE COMPANY Code No. 0816331 – Rev. 4 (05/13)
CARE AND CLEANING
PARTS LIST