Sloan ESD-236 Multi-Pack - Manual

Code No. 0816497
Rev. 0 (11/06)
INSTALLATION INSTRUCTIONS
MULTI-PACK AC ADAPTER FOR
ESD SERIES SOAP DISPENSERS
ESD-236 and ESD-237
Multi-Pack AC Adapter
SLOAN VALVE COMPANY • 10500 Seymour Avenue • Franklin Park, IL 60131
Phone: 1-800-9-VALVE-9 or 1-847-671-4300 • Fax: 1-800-447-8329 or 1-847-671-4380
www.sloanvalve.com
Printed in the U.S.A. 11-06 Copyright © 2006 SLOAN VALVE COMPANY
with
Installation Instructions
Parts List
Item # Part # Description
1. ESD-236 Multi-Pack Adapter Box (includes Item #’s 2 and 3)
Physical Dimensions: 5" (127 mm) Wide x 3-3/8" (86
mm) High x 2-1/4" (57 mm) Deep
2. — AC Wall Adapter with 6’ (1829 mm) Cord (included with
Item #1)
Physical Dimensions: 3-1/8" (79 mm) Wide x 2-1/8"
(54 mm) High x 1-1/2" (38 mm) Deep
3. — Mounting Kit, includes two (2) Wall Anchors with
Screws and one (1) 4½” (114 mm) x 3” (76 mm)
Adhesive Pad (included with Item #1)
4. ESD-237 Wire Assembly with Bayonet Connector (5’ /1524 mm)
Each Multi-Pack AC Adapter is designed to power up to four (4)
ESD-200/250/300/350 Soap dispensers.
Step 1
Disconnect and remove the battery packs from battery powered Model
ESD-250/350 Soap Dispensers, if applicable.
Step 2
Determine the mounting location for the Multi-Pack Adapter Box and AC Wall
Adapter. Make certain that cable lengths of the AC Adapter (6 ft/1829 mm) and
Wire Assemblies (5 ft/1524 mm) will reach their respective connections.
Step 3
Attach the Multi-Pack Adapter Box to the desired surface using the Wall
Mounting Anchors or double-sided Adhesive Pad.
Step 4
Plug the Three-prong Connector end of the Wire Assembly into one of the
Multi-Pack Adapter Box receptacles. Connect the remaining end with the
Bayonet Connector into the ESD-200/250/300/350 Soap Dispenser. Be sure to
secure the Bayonet power connection with the thumbnut. Follow the previous
instructions for connecting up to three (3) additional ESD-200/250/300/350
Soap Dispensers.
Step 5
Plug the AC Wall Adapter into the 120 VAC Wall Receptacle.
The ESD-200/250/300/350 Soap Dispensers are now ready for operation.
If further assistance is required, contact your nearest Sloan Representative
office or the Sloan Installation Engineering Department at:
1-888-SLOAN-14 (1-888-756-2614)
The information contained in this document is subject to change without notice.
Important: The Multi-Pack AC Adapter is not compatible with any Sloan Optima
or Optima Plus faucets.