Sloan 601 Prison Flushometer - Manual (Page 2)

2
MODELS 601 & 603 MODEL 611
MODEL 681
AFD VARIATION
If the valve installation includes an Anti-Flood Device installed between the valve
body and the vacuum breaker, the valve must be ordered with the “AFD” variation.
This assures that the proper length Vacuum Breaker tube is supplied. Anti-Flood
Device is supplied by the fixture manufacturer. Consult the fixture manufacturer
for installation requirements.
† Check that the “L” dimension shown on the flushometer package is correct
for your application. Determine the “L” dimension for your application by
using the following formula:
For Models 609, 611 and 613 – “L” Dim. = wall thickness (measured to
nearest whole inch) + 2-3/4” (70 mm)
For Models 601 and 603 – “L” Dim. = wall thickness (measured to nearest
whole inch) + 4-3/4” (121 mm)
For Model 681 – “L” Dim. = wall thickness (measured to nearest whole inch)
+ 6-3/4” (171 mm)
‡ For Solenoid Activated Flushometers (ES and ESM variations), the Water
Supply Rough-in dimension is 16” (406 mm).
MODEL 609 MODEL 613
“L” DIM †
4-3/4” (121 mm)
+ WALL THICKNESS
CENTER LINE
OF FIXTURE
1-1/2” (38 mm)
OPENING
IN WALL
1” I.P.S.
SUPPLY
(25 mm DN)
FIN.
FLOOR
CENTER LINE
OF WASTE
FIN. WALL
2” (51 mm) OPENING IN WALL
(1-1/2” (38 mm) CONNECTION
THROUGH WALL NOT SUPPLIED
BY SLOAN)
3-1/4” (83 mm)
LONG FLUSH TUBE
(FOR CONNECTION
BEHIND WALL)
2-1/8” (54 mm) MIN.4-
1/8” (105 mm) MAX.
4-3/4”
(121 mm)
FIN.
FLOOR
FIN. WALL
CENTER LINE
OF WASTE
CENTER LINE
OF FIXTURE
4-3/4”
(121 mm)
1-1/2” (38 mm)
OPENING
IN WALL
3-1/4” (83 mm)
LONG FLUSH TUBE
(FOR CONNECTION
BEHIND WALL)
1” I.P.S.
SUPPLY
(25 mm DN)
22-1/2”
(572 mm)
FIN.
FLOOR
FIN. WALL
1-1/2” (38 mm)
OPENING
IN WALL
CENTER LINE
OF FIXTURE
4-3/4”
(121 mm)
1” I.P.S.
SUPPLY
(25 mm DN)
3-1/4” (83 mm)
LONG FLUSH TUBE
(FOR CONNECTION
BEHIND WALL)
13”
(330 mm)
4-3/4”
(121 mm)
3/4” I.P.S.
SUPPLY
(20 mm DN)
CENTER LINE
OF FIXTURE
1-1/2” (38 mm)
OPENING
IN WALL
12”
(305 mm)
3-1/4” (83 mm)
LONG FLUSH TUBE
(FOR CONNECTION
BEHIND WALL)
FIN.
FLOOR
FIN. WALL
CENTER LINE
OF FIXTURE
4-3/4”
(121 mm)
1” I.P.S.
SUPPLY
(25 mm DN)
1-1/2” (38 mm)
OPENING
IN WALL
FIN.
FLOOR
CENTER LINE
OF WASTE
FIN. WALL
3-1/4” (83 mm)
LONG FLUSH TUBE
(FOR CONNECTION
BEHIND WALL)
26”
(660 mm) ‡
MODEL 601
20-1/2”
(521 mm)
MODEL 603
16”
(406 mm)
MODEL 601
19” (483 mm)
MODEL 603
14-1/2”
(368 mm)
24”
(610 mm)
2-1/8” (54 mm) MIN.
4-1/8” (105 mm) MAX.
2” (51 mm) OPENING IN WALL
(CONNECTION THROUGH WALL
NOT SUPPLIED BY SLOAN)
“L” DIM †
2-3/4” (70 mm)
+ WALL THICKNESS
14-1/2”
(368 mm)
2-1/8” (54 mm) MIN.
4-1/8” (105 mm) MAX.
2” (51 mm) OPENING IN WALL
(1-1/2” (38 mm) CONNECTION
THROUGH WALL NOT SUPPLIED
BY SLOAN)
“L” DIM †
2-3/4” (70 mm)
+ WALL THICKNESS
13-1/2”
(343 mm)
1” (25 mm) OPENING IN WALL
(3/4” (19 mm) CONNECTION
THROUGH WALL NOT SUPPLIED
BY SLOAN)
1-1/2” (38 mm) MIN.
4-1/2” (114 mm) MAX.
“L” DIM †
2-3/4” (70 mm)
+ WALL THICKNESS
24-1/2”
(622 mm)
2-1/8” (54 mm) MIN.
6-1/8” (156 mm) MAX.
2” (51 mm) OPENING IN WALL
(1-1/2” (38 mm) CONNECTION
THROUGH WALL NOT SUPPLIED
BY SLOAN)
“L” DIM †
6-3/4” (171 mm)
+ WALL THICKNESS
ROUGH-INS