Skutch Electronics CBC 9000 - Manual (Page 2)

Al Sandige Page 2 12/05/01
Quick Start Sheet
This section is designed to get the system ON
LINE fast! You will also find it helpful if you ever
need to have someone else operate your system for
you. Anyone should be able to get the system ON
LINE and producing leads without help if they
follow these simple steps.
• Sequential Dialing
The RESET key is the black round key next to
the 3 key.
Place the announcement tape in the
TRANSMITTER deck which is on the left hand
side, and the response tape in the RECEIVER deck
which is on the right hand side. The tapes should
both be installed so that the FULL reel is on the left
hand side.
1) Press RESET 1 #.
2) Enter complete seven digit starting number, then
press #.
3) Enter the last four digits of the STOP (ending)
number, then press # # 1.
NOTE: The system will not dial before 9:00
a.m. or after 9:00 p.m.
• Playback
1) Turn the volume control up.
2) Press RESET 9 #.
3) Press 1 to REWIND, # to STOP, 0 to PLAY
and 2 to FAST FORWARD.
• Memory Dialing
The RESET key is the round black key next to
the 3 key.
Place the announcement tape in the
TRANSMITTER deck which is on the left hand
side, and the response tape in the RECEIVER deck
which is on the right hand side. The tapes should
both be installed so that the FULL reel is on the left
hand side.
1) Press RESET 2 # #.
2) Enter a complete phone number, followed by the
# key. Repeat until all numbers are entered.
3) Press 3 # 1.
NOTE: The system will not dial before 9:00
a.m. or after 9:00 p.m.
•
Set the System Up
1) Insert TRANSMITTER tape in the left hand
side tape deck, with the full reel on the left side.
2) Insert RECEIVER tape in the right hand side
tape deck, with the full reel on the left side.
• Setting Time
Example 1
11:54 a.m. on Tuesday
1) Press RESET * # 1.
2) Press 2 # (1 – 7, Monday through Sunday).
3) Press 1 1 5 4 # RESET.
Example 2
4:31 p.m. on Saturday
1) Press RESET * # 1.
2) Press 6 # (1 – 7, Monday through Sunday).
3) Press 1 6 3 1 # RESET (4:31 p.m.=16:31 in 24
hour format).
• Setting Clock Control
The factory settings allow dialing ever day from
9:00 a.m. until 9:00 p.m.
Example 1
You wish to change the dialing on Saturday to
12:00pm until 8:00pm.
1) Press RESET * # # 1.
2) Press 6 # (1 – 7, Monday through Sunday).
3) Press 1 2 0 0 #.
4) Press 2 0 0 0 # RESET (8:00 p.m.=20:00 in 24
hour format).
Example 2
You wish to disable dialing on Sunday.
1) Press RESET * # # 1.
2) Press 7 # * RESET (1 – 7, Monday through
Sunday).
• Test Your Announcement
1) Turn the volume up.
2) Press RESET 8 # and wait for TAPE to reset.
3) Press # and TAPE will play to end, reset and
return you to the MENU.