Skutch Electronics BA-1000-A V4.00 Technical Reference Manual - Manual (Page 24)

Version 4.00 Page 24
When finished, it stops calling your urgent
numbers until the next time someone triggers the
system.
! Local Playback
Press: ~ ~ ~ ~.
Wait 5 seconds.
Press and HOLD DOWN
4 4 4 4 until you hear a
Beep, then release.
Enter your PIN , then # # # #.
! Remote Playback
Call the BA-1000-A from a Touch Tone
telephone.
After the message starts to play, enter * * * *,
your PIN , then # # # #.
The system will play back the Urgent
messages. When finished, if you have more
messages on the system, it will Beep 3 times; now
enter a
0 0 0 0 within 4 seconds to hear these messages.
! Remotely Program Urgent
Phone Numbers
Call the BA-1000-A from a Touch Tone
telephone.
After the message starts to play, enter:
* 0506 # * 0506 # * 0506 # * 0506 #
Wait 1 second.
Enter your
PIN , then # # # #.
Wait 1 second.
Press:
1 1 1 1
For this example we are entering a home phone
number, then a pager phone number.
786-6100 (Home)
343-2234 (Pager) - Pager to display 1234.
Enter:
13 7866100 # 13 7866100 # 13 7866100 # 13 7866100 #
Wait for the Beep then enter:
11 3432234 *2 11 3432234 *2 11 3432234 *2 11 3432234 *2
1234 #
1234 # 1234 # 1234 #
To exit, enter: ** ** ** **.
! Remotely Record Your
Mail Box Message
Call the BA-1000-A from a Touch Tone
telephone.
After the message starts to play, enter:
* 0506 # * 0506 # * 0506 # * 0506 #
Wait 1 second.
Enter your
PIN , then # # # #.
Wait 1 second.
Press:
5 5 5 5, then start talking after the low beep.
Press the * * * * to end.
To exit, press * * * * again.
Sample Mail Box Message
"You have reached Dr. Williams’ voice mail.
Just leave your name, number and a brief message,
after the tone, and I will contact you as soon as
possible. If this is an urgent call, dial an 8 after
your message and I will be notified immediately."
! Remotely Change to
Answer Mode
Call the BA-1000-A from a Touch Tone
telephone. If the system is in Idle Mode, it will ring
10 times before answering.
After the message starts to play, enter:
* 0506 # * 0506 # * 0506 # * 0506 #
Wait 1 second.
Enter your
PIN , then # # # #.
Wait 1 second.
Press:
0 0 0 0 to change to Answer Mode;
“Enable”.
To exit, press * * * *.
! Remote Default Box
Programming
Call the BA-1000-A from a Touch Tone
telephone.