Skutch Electronics BA-1000-A V4.00 Technical Reference Manual - Manual (Page 17)

Version 4.00 Page 17
next option. To exit from this mode, press then
release
~ ~ ~ ~ to return to Total Calls .
! Auto Timed= Off
This option turns the automatic auto answer
clock control feature on/off. When On, the system
will activate at the designated start times and
deactivate at the designated stop times. The display
will look as follows:
Auto Timed= Off
1=Change #=Next
Press then release 1 1 1 1 to toggle between On
and Off; press then release # # # # to go to the next
option. You can press then release ~ ~ ~ ~ to
return to the Total Calls screen.
! Pulse Rate= Slow
This option allows you to change the system
between slow pulses and fast pulses when it is in
pulse dial mode. With the option set to Slow, the
system will dial pulse digits at the standard 10
pulses-per-second rate. When set to Fast, the
system dials pulse digits at 20 pulses-per-second;
this makes for faster dialing, but not all phone
companies accept this rate. The display will look as
follows:
Pulse Rate= Slow
1=Change #=Next
Press then release 1 1 1 1 to toggle between Slow
and Fast; press then release # # # # to go to the next
option. You can press then release ~ ~ ~ ~ to
return to the Total Calls screen.
! Play Line= Off
This option allows you to choose whether the
system mirrors the outgoing message, or the actual
phone line input, to the speaker during message play
out on each call. With this option set for Off, the
system will mirror the outgoing message to the
speaker; this makes the entire call sound clear. With
this option set On, the system will mirror the phone
line audio to the speaker; this allows you to actually
hear what the called party is saying during message
play out, but the outgoing message will sound a little
distorted to you (rest assured, the called party hears a
clear message). The display will look as follows:
Play Line= Off
1=Change #=Next
Press then release 1 1 1 1 to toggle between On
and Off; press then release # # # # to go to the next
option. You can press then release ~ ~ ~ ~ to
return to the Total Calls screen.
! No Ans Rings= 6
This option allows you to set the number of
rings the system accepts, before it considers the call
a No Answer.
No Ans Rings= 6
1 to 9 #=Next
Enter from 1 1 1 1 to 9 9 9 9 to choose from 1 to 9
rings before the call becomes a No Answer, then
press then release
# # # # to go the next option. You
can press then release ~ ~ ~ ~ to return to the
Total Calls screen.
! Hello Pause= 05
This option lets you change the amount of
silence needed, to activate the message, after
someone says “Hello”. CAUTION: This value
should NOT be adjusted unless instructed to by a
Skutch Service Technician. For this option, 1 = .1
seconds. The display will look as follows:
Hello Pause= 05
05 to 15 #=Next
Enter the level from 05 05 05 05 to 15 15 15 15 then
press then release # # # # to go to the next option. You
can press then release ~ ~ ~ ~ to return to the
Total Calls screen.
! Sense Level= 15
This option lets you manually set the sensitivity
level for the system’s answer detect. CAUTION:
This value should NOT be adjusted unless instructed
to by a Skutch Service Technician.