Sensoray 826 - Manual (Page 31)

Parameters
board
826 board number. This must match the settings of the board's dip switches as described in section 2.2.
chan
DAC channel number in the range 0 to 7.
range
Pointer to a buffer that will receive the output range code as described in Section 5.3.1.
setpoint
Pointer to a buffer that will receive the output level as described in Section 5.3.2.
safemode
Specifies the RAM bank to be written: '0' = runmode, '1' = safemode.
Return Values
If the function succeeds, the return value is zero.
If the function fails, the return value is an error code.
Remarks
This function can be used to determine whether previously written configuration data has been sent to the DAC device.
The value S826_ERR_NOTREADY will be returned if the range or setpoint is not yet active (i.e., one or both values
have not yet been transmitted to the DAC device).
826 Instruction Manual 26 Analog Outputs