Seaward 300 PrimeTest User Manual

Page 71

Text mode
Original mode

PrimeTest 300

Operating Instructions

- 70 -

This sequence will now progress to the Earth Continuity
test as shown. This test will measure the resistance of
the protective earth path.

The

START key icon is flashing, indicating that a key

press is required to initiate the test. The probe icon is
illuminated to indicate that the test probe is required for
this test. Connect the test probe to an exposed metal
part on the equipment under test and press the

START

key to begin measurement.
Real time measurement values are displayed whilst the
test is in progress.