Seaward 300 PrimeTest - Manual (Page 65)

PrimeTest 300
Operating Instructions
- 64 -
13.3 Entering Location Information
Move the cursor to the Location field.
A Location can be selected in the same way as a Site,
using Quick Text to choose from the list previously
stored in memory or a new Location can be entered
using the keypad.
Note: If the LEFT/RIGHT arrows are pressed before
entering a character from the keypad, the full
Location list will be opened.
13.3.1 Selecting a Location using Quick Text
Enter the first letter of the required Location name using
the keypad. If the Location name is currently in memory
it will be displayed in a list of available Locations. The
example below shows the display if the “S” key is
pressed on a PrimeTest 300 that has been pre-
configured with a list of Locations.