Seaward 300 PrimeTest - Manual (Page 33)

PrimeTest 300
Operating Instructions
- 32 -
The User Test Name will now be highlighted. For
convenience a selection of commonly used names have
been entered. Use the left/right arrow keys to scroll
through the factory-programmed names or enter a new
name using the keypad then select the OK (F4) function
key to confirm.
Now, using the down arrow, move the highlight bar to
the User Test Units field. Again, a selection of commonly
used units is available for convenience. Select the
required units using the left/right arrow or enter new
units using the keypad.
The screen below shows a User Test created to record
microwave leakage in mW/cm
2
.