Seaward 300 PrimeTest - Manual (Page 43)

PrimeTest 300 Operating Instructions
- 42 -
Use the left/right arrow keys to change to an existing
User Name or press New (F3) and type in a new name
as shown below.
Press OK (F4) to accept the new user name.
This new user will have no password set as default. If a
password is required see section 10.4 – Change
Password. Press OK (F4) to finish.
Note: If a User has been set up along with a
password this password must be entered in
the Password field of the Change User screen.
The unit will not allow this User to be selected
if the password is incorrect.
As the active User has been changed from Admin,
access to the configuration menus has been removed.
When logged in as any other User access is restricted,
as
can be seen below, where the unavailable
configuration options have a line through them.
This feature allows an administrator to configure the
instrument and then prevent other users from making
any modifications.