beautypg.com

Seaward 300 PrimeTest User Manual

Page 45

background image

PrimeTest 300

Operating Instructions

- 44 -

Enter the current password into the first field – if no
password is set then leave this field blank.
Use the arrow keys to move to the New Password field.
Type the new password. Use the arrow keys to move to
the Confirm New Password field. Enter the new
password again. Press

Enter (F4) followed by OK (F4)

to finish.

Note: If there are any mistakes in this screen the

unit will not allow the new password to be
stored. Esc (F2) will exit this screen without
saving changes.

See also other documents in the category Seaward Equipment: