Led display only displays part of the image, Signal needs to scale, No display in the second half part of led display – RGBLink VSP 5360 User Manual

Page 97: Resolution is insufficient, All key lights light on simultaneously, Check if dial switch is normal, Led display only shows part of the image

VSP 5360 User Manual 97

Signal Needs to Scale

Push [Scale/Position] button in the processor and knob to adjust the actual

screen size of the screen, including ―H Size‖, ―V Size‖, ―H Pos‖, ―V Pos‖

and ―Reset‖. Push the knob to confirm.

Resolution is Insufficient

Please make sure the points of the screen width and height, choose the

resolution to be bigger than screen width via push the [MENU] button to

find , and push the knob to confirm.

Check If Dial Switch is Normal

Shut the power, check if two red dial switches near CV are upward. Reboot

if they face down, and reboot. The function of the red dial switched is

mainly upgraded.