How to realize the logo capture, System setup and operation – RGBLink VSP 5360 User Manual

Page 88

6. System Setup and Operation

How to Realize the LOGO Capture

VSP 5360 User Manual 88

1. Push the [MENU] button and enter to the menu items, turn the knob, and

choose , push the knob to confirm, turn the knob, and

choose option, OLED shows as follows:

2. Choose the input source.

3. Freeze image, when capture LOGO, the program image should be

frozen.

4. Set the LOGO horizontal position, vertical position, horizontal size and

vertical size.

5. Save the image to LOGO1 or LOGO2.

6. Start to capture LOGO.

Note

The [LOGO] button can also fulfill this setting.

—>

SELECT INPUT LOGO

FREEZE IMAGE OFF
H POS 0
V POS 0

—>

H SIZE 1024

V SIZE 768
SAVE TO LOGO 1
START CAPTURE LOGO