Vsp 5360 back panel, Cont interface, Dial switch – RGBLink VSP 5360 User Manual
Page 26: 10/100m udp interface, Hardware orientation, Cont interface 1
2. Hardware Orientation
VSP 5360 Back Panel
VSP 5360 User Manual 26
The figure below illustrates the professional interface and control signals of
VSP 5360 back panel.
NO
INTERFACE
NO
INTERFACE
1
Dial Switch
18.19
Displayport Input
2
10/100M Interface RJ45
20.21.22
DVI Input
3
USB Interface
23
3G-SDI Input
4
RS232 Interface
24
SDI Loop Out
5.6.9.10
10/100M Interface of
Sending Card
25.26
DVI Output
7.11
USB Control Port of Sending
Card
27.28
VGA Output
8.12
DVI input port of sending card
29
Switch
13.14.15 CVBS Input BNC port
30
Power IEC-3 port
16.17
VGA Input
31
S. V. D. U Optional Module
CONT Interface
1.
Dial Switch
If the two dial switches are upwards, the device is in normal work, and if
they are downwards, the device is in upgrade state. OLED module light is
off when the device is in upgrade state. Some of the button lights turn on,
and the device will not work.
2. 10/100M UDP Interface