RGBLink VSP 5360 - Manual (Page 90)

6. System Setup and Operation
How to Realize the Screen Size Setting
VSP 5360 User Manual 90
How to Realize the Screen Size Settin g
VSP 5360 supports the screen parameters to meet the requirement where
user want to switch between scale screen size and full display size (like
monitor). This is only enable for a single display window. Following is an
example of a screen size is1408 x 832.
Operator can defined the VSP 5360 output resolution from standard output
resolution list or customized the output resolution which is higher than 1408
x 832. For this application 1440x900 is an example:
Push the [MENU] button to go into the menu items, turn the knob and
choose , push the knob and goes into the
screen menus as following:
SCREEN H SIZE--Horizontal pixels, turn knob or use the digital button to
input the value1408.
SCREEN V SIZE--Vertical pixels, turn knob or use the digital button to input
the value 832.
SCREEN H POS--Horizontal position, default value is 0, set the value as
the way of H SIZE and V SIZE.
SCREEN V POS--Vertical position, default value is 0, set the value as the
way of H SIZE and V SIZE.
MODE-- Mode option, choose SCREEN SIZE.