RGBLink VSP 5360 - Manual (Page 28)

2. Hardware Orientation
VSP 5360 Back Panel
VSP 5360 User Manual 28
24：SDI Loop Out
SDI loop out, connect to the SDI input of the next VSP 5360 or the device
with SDI input.
Note
Interface 23 and 24 is SDI input and SDI
loop out, S optional module.
OUTPUT Interface
25.26：DVI Output
Connect to the monitor or LED display which has DVI interface.
(This DVI connector does not support hot-plugging).
27.28：VGA Output
Connect to the monitor or LED display which has VGA interface.
(This DVI connector does not support hot-plugging).
Sending Card Interface
5.6.9.10: 10/100M Interface RJ45
Gigabit copper port, used to connect LED display.
7.11：USB Control Port of Sending Card
Remote communication device controls interface, and is used to connect
the computer.
8.12: DVI Input Port of Sending Card
Connect the DVI Output in video processors.
(This DVI connector does not support hot-plugging)
Optional Module
31: S. V. D. U Optional Module
Compatible with SDI, VGA, DVI or USB optional module. SDI optional