Split, Menu orientation – RGBLink VSP 5360 User Manual

Page 41

Menu Orientation

VSP 5360 User Manual 41

, user can change the screen through the

digital setting parameters to easily change the screen size and position.

Mainly used in the LED display. Settings as follow:

SCREEN H SIZE: Width setting.

SCREEN V SIZE: Height setting.

SCREEN H POS: Screen horizontal position setting.

SCREEN V POS: Screen vertical position setting.

MODE: User can choose screen size or full size.

RESET: If image quality distorts by improper operation, it can be recover by

reset.

For details, please refer to the instructions in the manual:

Push the [MENU] button, OLED shows the menu, turn the knob and select

, push the knob to confirm, there are 2 kinds of split modes, shown

as follows:

SPLIT ON/OFF: User can choose open or shutoff the split function.

HORIZONTAL 1/2: Settings are as follows:

H TOTAL: The total width points of LED display that will split.

V TOTAL: The total height points of LED display that will split.

FIRST WIDTH: The width of the device when do split.

H POS: The horizontal position of the device when do split.

V POS: The vertical position of the device when do split.

VERTICAL 1/2: Settings are as follows:

H TOTAL: The total width points of LED display that will split.

V TOTAL: The total height points of LED display that will split.

FIRST HEIGHT: The height of the device when do split.

H POS: The horizontal position of the device when do split.