RGBLink VSP 5360 - Manual (Page 103)

VSP 5360 User Manual 103
C. Software Upgrade
1. Communication Board Upgrade
Communication board upgrade by USB port, and detailed upgrade steps are as follows:
(1) Connect the USB interface of VSP 5350/VSP 5360 to the computer with a USB cable.
(2) Plug in the power cord, and make sure the device is in normal operation.
(3) Push [MENU] button, and choose option, operation steps are:
MENUSYSTEMUSB UPDATESEL.
(4) Open the USB drive that plug into the computer, and delete the "firmware. Bin" file in
the USB drive, then copy the 100M file of VSP 5350/VSP 5360 to the USB drive,
program loading is complete after the file has been copied.
(5) Restart the device, and enter the menu to check if the version is right, factory reset is
completed. The operation steps are: MENUSYSTEMSYSTEM INFOCom Board
Ver.
2. Firmware Upgrade
Firmware upgrade by personal computer, the form of the file is: .bin, and detailed
upgrade steps are as follows:
1. Connect the device to the PC with a RS232 serial line or USB cable. Then double click
the software: UpdateProgram.exe .