How to add or clear the layer, System setup and operation – RGBLink VSP 5360 User Manual

Page 83

6. System Setup and Operation

How to Add or Clear the Layer

VSP 5360 User Manual 83

Push any button of A, B, C, D in LAYERS area, or push all the 4 buttons,

the button light is on, it means the layer is selected, and add layer finished.

For example, add layer B, push button B, button B light is on, and the

OLED panel shows as follows:

In LAYERS area, push any key of button A, B, C, D that need to clear, the

button light flashes. Push the button again, key light is off, and clear layer

finished.

For example, clear layer B, OLED panel shows as follows:

ON LAYER B
H POS : 0 V POS : 0
H SIZE: 1024 V SIZE: 768

OFF LAYER B