RGBLink VSP 5360 - Manual (Page 86)

6. System Setup and Operation
How to Zoom the Image
VSP 5360 User Manual 86
How to Zoom the Image
The image can be zoom in horizontal or vertical separately, to meet the
special effects required.
Push the [Crop/Zoom] button, and enter to the menu items, user can zoom
the image by knob or number buttons, settings are as follows:
V UP: Zoom in vertical and the image will be zoom in to the top direction
from its bottom.
V DOWN: Zoom in vertical and the image will be zoom in to the down
direction from its top.
V UP/DOWN: Zoom in vertical but in both top and down direction from its
middle.
H LEFT: Zoom in horizontal and the image will be zoom in to the left
direction from its right.
H RIGHT: Zoom in horizontal and the image will be zoom in to the right
direction from its left.
H LIFT/RIGHT: Zoom in horizontal but in both left and right direction from
its middle.
CENTER: Zoom in 4 corner direction from center.
RESET: If image quality distorts by improper operation, it can be recover by
reset.