REMKO SV 261 - Manual (Page 5)

The equipment was shipped in
sturdy packaging. Immediately
check the equipment on delivery
and make a note of any damage or
missing parts on the delivery note.
Inform the forwarding agent and
contractual partner.
Warranty claims at a later date will
not be accepted.
The SV 261-681 air conditioning
equipment consists of an REMKO
SV...AT outdoor component and
an SV...IT indoor unit.
The outdoor component serves to
output the heat extracted by the
interior unit from the room being
cooled.
The outdoor component can be
installed outdoors or indoors. The
latter requires the fulfilment of
certain conditions.
The indoor unit is designed for
suspended ceilings with Euroraster
dimensions. The cassette is hidden
behind the suspended ceiling, only
its cover is visible.
It is operated by an infrared
remote control.
The outdoor component comprises
a refrigerant and compressor,
finned liquefier, liquefier fan
and flow regulator. The outdoor
component is controlled by the
regulator in the indoor unit.
The indoor unit comprises a
finned vaporises, vaporiser fan,
controller and condensation tray.
Winter controllers, floor and wall
brackets, refrigerant pipes, wired
remote controls and condensation
pumps are also available as
accessories.
Unit description
Transportation and
packaging
Schematic of refrigerant circuit in indoor unit
Vaporiser fan
Connection to suction
pipe
Connection to injection pipe
Vaporiser
Refrigerant pipes are used to connect the indoor unit to the outdoor
component.
Outdoor component
System layout
Stop valve
Indoor unit with
Cover
Liquefier fan
Indoor area
Outdoor area
Injection pipe
Suction pipe
Electr.
mains cable
Electr.
control cable
M
M
Schematic of exterior refrigerant circuit
Liquefier fan
Connection
valve
suction pipe
Connection
valve
injection pipe
Compressor
Capillary tube flow regulator Filter dryer Liquefier
Reverse flow valve
Connection for
pressure gauge
Condensation pipe
5