REMKO SV 261 - Manual (Page 13)

Shutdown
Temporary
shutdown
1. Let the indoor unit run for 2 to
3 hours in circulation mode, or
in cooling mode at maximum
temperature, to extract any
residual humidity from the unit.
2. Shut down the unit using the
remote control.
3. Switch off the voltage supply to
the unit.
4. Check the unit for visible
signs of damage and clean as
described in the chapter "Care
and maintenance"
Permanent shutdown
Ensure that equipment and
components are disposed of in
accordance with local regulations,
e.g. through authorised disposal
and recycling specialists or at
collection points.
REMKO GmbH & Co. KG or your
sales partner will be pleased to
provide details of specialists in your
area.
Care and maintenance
Regular care and maintenance
ensure trouble-free operation and
a long service life.
Care
■ Ensure the indoor unit and
outdoor component are
protected against dirt, mould
and other deposits.
■ Clean the equipment using a
damp cloth. Do not use any
caustic, abrasive or solvent-
based cleaning products. Do
not use a jet of water.
Prior to performing any
work, ensure the equipment
is isolated from the voltage
supply and secured to prevent
accidental switch-on!
CAUTION
■ Clean the fins on the indoor
unit and outdoor component
prior to long shutdown periods.
■ Cover the outdoor component
with plastic sheeting to prevent
the ingress of dirt.
Maintenance
■ It is recommended that you
take out a maintenance
contract with an annual service
from an appropriate specialist
firm.
This ensures the operational
reliability of your equipment!
TIP
Type of task
Checks/Maintenance/Inspection
Commissioning Monthly Six-monthly yearly
General
• •
Measure voltage and current
• •
Check compressor/fans are functioning correctly • •
Check fan is functioning correctly
• •
Dirt on liquefier/vaporiser • •
Check refrigerant fill quantity
• •
Check condensation drain
• •
Test insulation • •
Check moving parts • •
13