beautypg.com

Decommissioning, Care and maintenance – REMKO RXT xxx DC User Manual

Page 13

background image

Decommissioning

Temporary shutdown

1. Allow the indoor unit to run

for 2 to 3 hours in circulation
mode or in cooling mode at the
maximum temperature setting
in order to remove any residual
moisture from the unit.

2. Shut down the unit using the

remote control.

3. Switch off the power supply to

the unit.

4. Cover the unit as far as possible

with plastic foil in order to
protect it from the influences of
weather.

Permanent
decommissioning

Ensure that the units and
components are disposed of in
accordance with local regulations,
e.g. using authorised disposal and
and recycling specialists or at
collection points.

REMKO GmbH & Co. KG or your
contractual partner will be pleased
to provide a list of certified firms
near you.

Care and maintenance

Regular care and maintenance
serves to ensure the trouble-free
operation and long service life of
the units.

Care

Ensure the indoor unit and
outdoor component are
protected against dirt, mould
and other deposits.

Clean the units using a damp
cloth. Do not use any caustic,
abrasive or solvent-based
cleaning products. Do not use
a jet of water.

Clean the fins on the indoor
unit and outdoor component
prior to long shutdown periods.

Maintenance

We recommend concluding
a maintenance contract
with annual service from an
appropriate specialist company.

For systems which operate
year-round (e.g. in server
rooms), the maintenance
intervals must be reduced
accordingly.

Contact Remko GmbH & Co.
KG to sign up for
a maintenance contract

TIP

Prior to performing any
work, ensure the units are
disconnected from the power
supply and secured to prevent
accidental switch-on!

!

CAUTION

Type of task

Checks/Maintenance/Inspections

Commissioning

Monthly

Half-yearly

Yearly

General

Measure voltage and current

Check function of compressor/fans

Check shaft bearings on fans

Dirt on condenser/vaporiser

Check refrigerant fill quantity

Check condensate drain

Inspect insulation

Check moving parts

Sealing test for refrigerant circuit

1)

1) see note

Statutory regulations require
an annual leak test for the
refrigerant circuit dependant
on the refrigerant quantity.
medium. Inspection and
documentation of the work
performed is to be carried out
by specialist technicians.

NOTE

13