REMKO MXD 202 - Manual (Page 35)

10 Shut-down
Temporary shut-down
1. Allow the indoor unit to run for 2 to 3 hours in
air circulation mode or in cooling mode at the
maximum temperature setting in order to
remove any residual moisture from the unit.
2. Shut down the system using the remote con-
trol.
3. Switch off the voltage supply to the unit.
4. Check the unit for visible signs of damage
and clean it as described in the chapter
"Care and maintenance"
Permanent shut-down
Ensure that equipment and components are dis-
posed of in accordance with the applicable regula-
tions, e.g. through authorised disposal and recy-
cling specialists or at collection points.
REMKO GmbH & Co. KG or your contractual
partner will be pleased to provide a list of certified
firms near you.
35