REMKO MXD 202 - Manual (Page 14)

3. Dehumidification mode
In this mode, the room is dehumidified, thereby the
room temperature significantly lowered. Influencing
temperature and fan speed in this mode not pos-
sible.
4. Heating mode
In this mode, the warm air in the room is warmed
to the desired temperature.
5. Air circulation mode
In this mode, the air in the room is circulated with
no change in temperature.
5 Key „FAN“
Press this key to set the desired fan speed. 4
speeds are available:
Automatic, high, medium and low fan speed.
6 Key „LED/FOLLOW ME“
Short press this button enables / disables the LED
display on the indoor unit.
With pressing this key longer then 2 sec., the
sensing of the room temperature is moved from the
interior unit to the remote control. The temperature
measured on the remote control is then transmitted
to the interior unit in certain intervals.
7 Key „SLEEP“
Pressing this key will automatically increase the
target temperature by 1 °C every hour in cooling
mode, and decrease the target temperature by 1
°C every hour in heating mode.
8 Key „SWING“
This key directly activates the oscillating function of
the fins for better air distribution in the room.
9 Key „DIRECT“
The position of the exhaust fins is determined with
this button. The fins change by pressing of the
„DIRECT“-key they position by 6°.
10 Key „TIMER ON"
This button initiates the automatic switch-on time
for the unit. Each time the key is pressed, the auto-
matic time setting increases in increments of 30
minutes. Once the time setting shows 10.0, the
automatic time setting increases in increments of
60 minutes each time the key is pressed. In order
to cancel the automatic time setting, simply set the
automatic switch-on time to 0.0.
11 Key „TIMER OFF“
This button initiates the automatic switch-off time
for the unit. Each time the key is pressed, the auto-
matic time setting increases in increments of 30
minutes. Once the time setting shows 10.0, the
automatic time setting increases in increments of
60 minutes each time the key is pressed. In order
to cancel the automatic time setting, simply set the
automatic switch-off time to 0.0.
12 Key „TURBO“
The „TURBO“- key allows the preset temperature
to be reached in the shortest possible time.
Pressing this key in "Cooling mode" causes the
unit to blow a blast of cooling air into the room at a
very high fan speed.
13 Key „SHORTCUT“
By first press on this button the setpoint to 24 ° C
and the fan speed is set to automatic. When the
button is pressed while the remote control during
the operation, the unit resets to the last setting
operating mode.
14 Key „LOCK“
This key can be used to lock the keys on the
remote control. Press again this key and the
remote control can be used again.
15 Key „RESET“
Press the "RESET" key to reset all settings to fac-
tory settings.
REMKO MXD
14