REMKO MXD 202 - Manual (Page 19)

„Follow-Me“ function
This function allows the transfer the measurement
of the room temperature from the indoor unit to the
remote control. Measuring the temperature at the
remote control is then transmitted at intervals to
the indoor unit.
LED
FOLLOW ME
> 2 sec.
Fig. 17: „Follow-Me“ function
„SLEEP“ key
A programming function is activated using this key,
which increases the target temperature in cooling
mode by 1°C after one hour and by 2°C after 2
hours. In heating mode, the target temperature is
decreased by 1 °C after one hour by 2 °C after 2
hours. The unit switches off automatically after 8
hours.
SLEEP
Fig. 18: "Sleep" key
19