REMKO MXD 202 User Manual
Page 13
Display on the indoor unit
The lit LED indicators show the settings:
LED OPERATION green = unit is on
LED TIMER yellow = timer is programmed
LED DEF/FAN red = defrosting active / air circulation mode
LED ALARM red = presence of a fault
2
1
4
6
3
5
Fig. 5: Display on the indoor unit
1:
Unit for receiving signals from the remote con-
trol
2:
Operation indicator
3:
Timer indicator
4:
Key for manual operation
5:
Fan Defrost
6:
Alarm indicator
Keys on the remote control
4
1
7
8
10
11
3
2
13
9
5
6
12
14
15
Fig. 6: Keys of the remote control
1
Key „ON/OFF“
Press this key to operate the unit.
2
Key " "
With this key, the desired temperature can be
decreased to 17°C.
3
Key " "
With this key, the desired temperature can be
increased up to 30°C.
4
Key „MODE“
Press this key to select the operating mode. The
indoor unit has 5 modes:
1. Automatic mode
In this mode, the unit works in cooling or in heating
mode.
2. Cooling mode
In this mode, the warm air in the room is cooled
down to the desired temperature.
13