REMKO MXD 202 - Manual (Page 26)

A B
1
Fig. 35: Fresh air connection
1: Fresh air inlet
A: Outdoor
B: Indoor
n The quantity of fresh air may not exceed 10%
of the nominal circulating air volume; otherwise
it is possible that the unit will not work properly.
n To prevent rainwater from entering the unit, the
air may only be suctioned in by the fresh air
intake at a maximum speed of 2.5 m/s.
n To connect the fan, it is necessary for the cus-
tomer to install a separately fused electrical
installation.
In addition, in the following picture framed poly-
styrene partition the drip pan must be removed
with a knife. (Fig. 36).
1
Fig. 36: Fresh air inlet
1: Fresh air inlet
REMKO MXD
26