QuickLabel R-310 QuickWrap User Manual

Page 18

ADJUST PEELER PLATE AS FOLLOWS

1. Using the provided 9/64” Allen wrench just loosen – DO NOT REMOVE -

the two 8-32 SHCS located on the left side of the peeler assy. (see “C” in
Fig 12)

2. Using a 5/32” Allen wrench just loosen – DO NOT REMOVE - the two 10-

32 SHCS located to the right of the peeler assembly (see “D” in Fig 12).

3. Adjust the peeler plate.
4. Re-tighten all screws.

Fig 12