QuickLabel R-310 QuickWrap - Manual (Page 10)

10
WEBBING THE R-310
Place the roll of labels on the unwind spool. Install the label disc and while
pressing it against the label reel, tighten thumbscrew. Remove enough labels so
only backing paper is threaded from peeler plate back to rewind spool. Pull the
web over the anti-stripper roller and down under the web guide shaft, between
the web guides. Set the web guides so that the web is held with minimum side
play but still moves freely. Pull the web around the peeler plate and the roller
attached to the peeler assembly underneath. Wind the web over the top roller
and between top and bottom roller and back under bottom roller to rewind spool.
Fig 4