QuickLabel QLS-4100 Xe - Manual (Page 210)

F-4 Format error codes
36 Box height error
The height value of a graphics field is invalid.
37 Line thickness error
The value for line thickness in a graphics field is invalid.
38 Print intensity error
Valid print intensity settings are 1 to 32.
39 Print speed error
Valid print speeds are 2 to 7 inches per second.
50 .PCX Bitmap error
This error results from any of the following:
• Bad file format (not monochrome, not a .pcx file)
• File not present (may have stored to RAM and attempted to
recall from card)
80 .PCX Bitmap scale error
Valid scale factors for .PCX graphics fields are 1 to 10.
81 Code 49 start character error
The value to enable start and stop characters in a Code 49 bar-code
field is invalid.
82 Code 49 group error
The group size value is out of range.
83 Code 49 symbol error
The symbol specifier is invalid. (Refer to the Define Bar-code Symbol
command for Code 49.)
84 Reverse-image field association parameter error
The association parameter in the Define Reverse-Image Field
command is invalid.