Cutter enabled pause: options press select – QuickLabel QLS-4100 Xe User Manual
Page 106
4-60
Keypad controls and menus
Cutter
If using an optional cutter or cutter/stacker accessory, you can enable it using
the Cutter menu option.
To enable or disable the cutter:
1
If the printer is in a Ready state, press the PRINT/PAUSE key to pause
the printer.
2
Press the NEXT or PREVIOUS key until the Options menu is displayed.
Then press the SELECT key.
3
Press the NEXT or PREVIOUS key until the Cutter menu is displayed.
4
Press the + or – key until the desired setting is displayed. Available
options are Enabled or Disabled.
5
Press the SELECT key to confirm your choice.
Cutter
Enabled
Pause: Options
Press SELECT