QuickLabel QLS-4100 Xe - Manual (Page 133)

QLS-4100 Xe 6-1
Chapter 6:
Advanced Adjustments
Your QLS-4100 Xe has been carefully set at the factory to print optimally
using your specific type of media and ribbon. This chapter describes how to
perform advanced adjustments that may be needed when specialized media
is used in the printer.
This chapter explains how to:
• Adjust the printhead alignment relative to the platen roll to optimize
ribbon transfer for different material types or thicknesses.
• Adjust the angularity of the printheads with respect to each other so that
color alignment is consistent across the width of the media.
• Adjust the thermal transfer ribbon tension to alleviate wrinkling or
smudging.
• Adjust the Printhead Lift and Drive Station Lift Screws to redistribute
downward pressure when using narrow media.
• Set the Vertical and Horizontal Baselines so that print jobs sent to
multiple printers result in identical image positioning on the label.