Osoto Voting System User Manual
Page 7
TopA interactive teaching system user
’s manual
7
2.2 Receiver Installation
2.2.1 Driver installation in the first use
After disassembling the receiver packing, joins the USB line the receiver,
a USB line end is connected including the above the receiver, an end inserts
computer's USB receptacle, if the first installment, the computer could prompt
“finds the new hardware”, waited the computer to demonstrate that “the new
hardware already installed completes and may use” then; The later use inserts
directly then.
2.2.2
Examination the connection status of receiver
When start the teaching system, the system icon “
” will appear on the
toolbar. Receiver program will detect that the receiver is connected or not
automatically. Before connection the receiver, Mouse over the icon, show “This
equipment has not connected”
;
After connection the receiver, Mouse over the icon, show “This equipment