Mapping a recorder to the location – OpenEye SaleGuard User Manual
Page 19
19
Once locations have been added and the Collector has been configured, you will need to map the recorders
to each location. This allows you to link specific cameras to POS terminals when searching video and
transactions.
1.
Click Application, and then click
Manage DVRs
.
2.
Click
Add
.
3.
Select the corresponding
Location
to assign the recorder.
4.
Select the
Type
of recorder (
PC-DVR
,
OE3-E120/OE3-E480
, or
OE3-E240
)
5.
Type the recorder
Name
,
IP address
,
TCP Port,
and
Username
and
Password
of the recorder.
Assign a
Name
to the recorder that describes its location, such
as “Lobby” or “Loading Dock.”
6.
Click
OK
.
7.
To add more recorders to the location, repeat these steps.
8.
When you have added all of your recorders, click
Close
.