OpenEye SaleGuard - Manual (Page 18)

18 33112AB
Add a POS Connection
You must add a POS connection for every POS terminal. Follow these instructions to add or edit a POS
connection or to add RediWatch legacy compatibility.
1. On the SaleGuard Collector Configuration window, in the General tab, click Manage POS
Connections.
2. Click Add, and then select the appropriate POS Protocol ,
Connection type, and Port for the POS terminal.
If you are currently using RediWatch and want to keep
RediWatch integration, select the
Relay to RediWatch
checkbox and fill in the IP address and port of the
RediWatch Server.
3. Click OK . Verify the information in the POS Connections list, and then click Close .
4. To apply the new POS connection, click Apply Settings and Restart Service .
5. Click Yes to restart the service.
6. On the SaleGuard Collector Configuration window, click Application , and then, click Verify POS
Data . If the POS terminal and SaleGuard Collector are configured correctly, the POS data will
populate in real-time.